Electro-Voice ZX3-60PI 12-Inch Two-Way Passive Loudspeaker Permanent Installation Black

Electro-Voice ZX3-60PI 12-Inch Two-Way Passive Loudspeaker Permanent Installation Black

The Electro-Voice ZX360PI 12-Inch Two-Way Passive Loudspeaker Permanent Installation | Black is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil. The ZX3-60PI cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.

This speaker has water-resistant powder coated stainless steel grilles and waterproof glandnut input panels with SJO cable.

Key Features

• 2-way 600-watt suspension P.A. Speaker with 60 x 60degrees coverage for long-throw and cluster applications
• High output, 131dB SPL capacity
• Adjustable feet allow 45degrees or 55degrees speaker placement angle for use as stage monitor
• 12” forced-air-cooled woofer, 1” titanium diaphragm compression driver with 2” voice coil
• Rugged, high-tech polypropylene enclosure
• 3 suspension Anchor Plates, 10 M8 insert suspension points

Technical Specs

Frequency Response

-10dB: 48Hz – 20kHz

Power Capacity

600W

Maximum Sound Pressure Level (SPL)

131dB

Nominal Sensitivity

97dB

Impedance

8Ohms

Crossover

2kHz

Low Frequency Driver

DVX3121, 12” (305mm) Driver

High Frequency Driver

ND2, 1” (25.4mm) exit Neodymium

Enclosure Material

Polypropylene Structural Foam

Input Connections

Glandnut SJO Cable

Mounting Options

Enclosure has locations for 4 Single-Stud-Attachment Plates and 10 Forged Steel Eye-Bolts – 2 on top, 2 on bottom, 2 on side, 1 on rear of enclosure

Dimensions

24.14 x 15.64 x 14.26” (613 x 397 x 362mm)

Weight

43.7lbs. (19.8kg)